DStv
DStv E48-32 No Signal Error: Causes and How to Fix It
What DStv error E48-32 means, what you can check yourself in five minutes, and when the dish, LNB or cable needs an installer.
By the CPT Installation team · · 3 min read
E48-32 is the DStv error everyone dreads. It means the decoder isn't receiving a satellite signal. The good news: the cause is almost always physical (the dish, LNB or cabling), and many cases are quick to fix.
Step 1: Check the weather
Very heavy rain or thick storm clouds can temporarily block the satellite signal for everyone. If it's pouring, wait until the rain eases. If the error clears on its own, your installation is probably fine, although frequent rain dropouts can indicate marginal alignment.
Step 2: Check the cables at the decoder
- Make sure the satellite cable is firmly connected to the correct input on the back of the decoder.
- On an Explora with a Smart LNB, check the cable is in the right port.
- Look for kinks or damage where the cable enters the house.
Step 3: Restart the decoder
Switch the decoder off at the wall, wait 30 seconds, and switch on again.
Step 4: Check signal in the menu
Most decoders have a signal strength and quality screen in the settings or installation menu. If both are at or near zero, no signal is reaching the decoder.
Step 5: Look at the dish (from the ground)
- Has it visibly moved or been knocked? Wind, a ladder or a roofer are common culprits.
- Is anything new blocking it? A growing tree or new building.
- Is the LNB (the part at the end of the arm) damaged, loose or full of water?
Is it only one decoder?
- Only one decoder affected: the problem is likely that decoder's cable or connector.
- All decoders affected: the dish, LNB or main cable.
The usual causes we find
- Dish knocked out of alignment, very common after strong south-easters
- Corroded or waterlogged connectors, especially at the LNB
- Failed LNB
- Damaged cable, from rodents, gardening or UV
- Trees growing into the line of sight
What about other error codes?
- E16 errors usually relate to your subscription or decoder authorisation rather than signal. The DStv app and website have a "Fix errors" option, and you can contact MultiChoice.
- E48-32 is almost always physical, which is what an installer fixes.
When to call us
If the steps above haven't fixed it, the dish, LNB or cabling needs a technician with a signal meter. A realignment and signal test typically costs R450 to R850, and an LNB replacement R550 to R1,100.
Book a DStv repair, or see why signal drops in wind and rain in Cape Town.