Skip to content
CPTinstallation

CCTV

CCTV Not Recording? NVR and DVR Troubleshooting Guide

Recorder beeping, cameras showing no video or footage missing? A step-by-step guide to the most common NVR and DVR faults, and when to call an installer.

By the CPT Installation team · · 3 min read

Nothing is worse than going to check footage after an incident and discovering the system stopped recording weeks ago. Most recording failures give warning signs. Here is how to diagnose the common ones.

Step 1: Is the recorder on and is the hard drive healthy?

Log into the recorder (on a monitor or in the app) and look for the hard drive status.

  • "Uninitialised" or "Abnormal": the drive has failed or been disconnected.
  • "Full" with overwrite off: recording stopped when the drive filled up. Turn on overwrite.
  • No drive detected: a loose cable inside the recorder, or a dead drive.

Hard drives are the most common failure in older systems, especially after repeated power cuts. A surveillance-grade drive typically lasts three to five years. We replace them regularly on CCTV repair call-outs.

Step 2: Check the recording schedule

After a power cut or firmware update, some recorders revert to defaults. Make sure continuous or motion recording is enabled on every camera, 24/7.

Step 3: Is one camera showing "No Video"?

If one camera is out but others work:

  1. Check the camera's power. On analogue systems, look at the power supply box: a failed supply takes out several cameras at once.
  2. Check the connectors at the camera. Water in a BNC or network plug is extremely common in winter.
  3. On PoE systems, try plugging the camera into a different port.

If several cameras died at the same time, suspect the power supply or PoE switch, particularly after a power surge.

Step 4: The recorder keeps beeping

Beeping is the recorder's way of reporting an event. Common causes:

  • HDD error: see step 1.
  • Video loss: a camera has dropped out.
  • Network disconnected: the recorder lost its connection to the router.
  • Illegal login: someone entered the wrong password repeatedly. Change your password.

Check the recorder's log to see which one. Silencing the beep without fixing the cause is how systems end up not recording.

Step 5: The app shows "offline"

If the recorder is recording but the app can't connect:

  • Check the router is on (and on backup power during load shedding).
  • A new router or changed Wi-Fi password often breaks the connection.
  • The recorder's cloud (P2P) setting may need re-enabling.

See how to view CCTV on your phone.

Step 6: Footage is there but useless

Blurry, too dark or washed out at night? That is usually placement, spider webs or infrared reflection. See CCTV camera placement and colour night vision vs infrared.

Prevent it happening again

  • Enable HDD error notifications in the app.
  • Put the recorder on a UPS to prevent corruption during outages.
  • Check playback once a month.

If you would rather we sort it out, book a CCTV repair. Call-outs start from R450.

Free quote

Need CCTV help?

Tell us what you need and where. We reply with a fixed quote, usually the same working day.

  • Free, no-obligation quotes
  • Fixed written price before work starts
  • We repair systems other companies installed
  • 12-month workmanship warranty

Prefer to talk? Call 069 818 3843

Questions? Ask an installer.

Call or WhatsApp. We're happy to give a straight answer.

Call now WhatsApp